UNIMAC CLS500 15-50mm 18ga 2-in-1 Stapler/Brad Nail Gun, Cordless 20V Lithium Nailer — Edisons product image

UNIMAC CLS500 cordless nailer and stapler: what to check before buying

The UNIMAC CLS500 may suit DIYers wanting cordless fastening for trim and small assemblies, provided its fasteners and driving capacity match the job.

Affiliate disclosure

This buying guide contains affiliate links. Ballarat Search may earn a commission if you buy through them, at no extra cost to you. Product specifications come from merchant information unless otherwise stated. We do not claim hands-on testing.

Ballarat Search · Buying guide

Is UNIMAC CLS500 15-50mm 18ga 2-in-1 Stapler/Brad Nail Gun, Cordless 20V Lithium Nailer right for your needs?

In brief: The UNIMAC CLS500 may suit DIYers wanting cordless fastening for trim and small assemblies, provided its fasteners and driving capacity match the job.

Product at a glance

up to 500 shots per charge
Advertised runtime
up to 100 brad nails or staples
Advertised magazine capacity
20V lithium battery
Included battery
dual LED work lights
Work lighting

Listed merchant details only — confirm on the current product page before ordering.

Quick buying verdict

The UNIMAC CLS500 may suit DIYers wanting cordless fastening for trim and small assemblies, provided its fasteners and driving capacity match the job. Check the live product specifications and the limitations below before deciding.

View the product at Edisons

Confirm the current specifications, price, availability, shipping and warranty with the retailer.

View at Edisons →

Affiliate link · Opens in a new tab

The UNIMAC CLS500 combines a cordless brad nailer and stapler in one tool. Its main attraction is straightforward: you can move between small fastening jobs without setting up an air hose and compressor.

The supplied listing describes an 18-gauge, 20V tool with a battery, charger and carry case. That makes it worth considering for home projects, but it does not establish how well it drives every fastener into every timber. Before buying, check the details that determine whether it will suit your actual work.

UNIMAC CLS500 cordless 20V stapler and brad nail gun infographic showing workshop use, 19–40mm staples, 20–50mm brad nails, lithium battery and adjustable drive depth. Note: This is an illustrated product representation. Check the appearance and specifications against your original product photographs before publishing.

BUYING CHECK 01

1. Match the tool to the joint, not just the project

A brad nailer is generally useful for attaching light trim and holding small parts in position during assembly. Staples can provide a different fastening option, but their suitability depends on the crown width, leg length and material being fixed.

The merchant suggests trim, furniture assembly and light construction. Treat those as broad applications, not proof that this tool can make every connection within those projects. A small decorative furniture component and a load-bearing furniture joint have very different requirements.

  • Potentially suitable: light trim work, small workshop assemblies and projects calling for compatible brads or staples.
  • Needs closer checking: dense timber, delicate visible surfaces and jobs requiring fasteners to sit consistently flush.
  • Not a substitute for: specified structural fasteners, framing connections or screws and joinery where the design requires them.

If your project instructions specify a particular fixing, follow that specification rather than choosing a fastener simply because it fits the tool.

BUYING CHECK 02

2. Confirm the exact brads and staples it accepts

The product title states “15-50mm” and “18ga”. However, the supplied information does not separately set out the accepted length range for brads and staples, or identify the staple crown width and series. Do not assume the title’s range applies equally to both fastener types.

Before ordering, ask for a compatibility chart or check the manual. A staple can look similar to another and still have the wrong dimensions for the magazine.

  • Confirm the brad gauge, profile and supported lengths.
  • Confirm the staple series, crown width, wire size and supported leg lengths.
  • Measure the thickness of the piece being attached and the receiving material.
  • Check clearances behind and beside the fixing point, including concealed services.

Choose fastener length for the joint rather than automatically selecting the longest available. Too little engagement may give poor holding; too much length can cause breakthrough. For damp or exposed locations, also confirm the fastener’s corrosion suitability and whether the tool is appropriate for the conditions.

BUYING CHECK 03

3. Treat runtime and firing speed as upper-limit claims

The merchant claims up to 500 shots per charge and up to 60 fasteners per minute. These are advertised maximums, not independently verified results or a promise for your timber and fastener combination.

Battery runtime and driving results can vary with material density, fastener length, battery condition and working conditions. The supplied information does not state the battery’s amp-hour capacity or a charging time, even though it describes the included charger as a fast charger.

For occasional trim work, a single included battery may be convenient. For a longer session, stopping to recharge could matter more than the headline firing rate. Check the cost and availability of spare batteries, and confirm compatibility by exact model rather than assuming another 20V battery will fit.

Also check the firing mode and whether drive depth is adjustable. Neither is established by the supplied text. Those details matter if you need controlled placement or a consistent finish on visible work.

BUYING CHECK 04

4. Measure access and check handling before committing

Cordless operation removes the hose, but it does not guarantee a light or compact tool. The merchant describes a soft-grip rubber handle and balanced design; those are not a substitute for a published operating weight or a chance to assess the grip.

The supplied information gives no tool dimensions or weight with the battery installed. That leaves an important gap if you plan to work overhead, inside cabinets or close to an internal corner.

  • Measure the narrowest opening where the whole tool must fit.
  • Check whether the nose can reach the intended fixing line.
  • Ask for dimensions with the battery fitted, plus magazine-loading clearance.
  • Consider how long you will hold the tool at arm’s length or above shoulder height.

Dual LED work lights are listed and may help you see the work area. They do not establish that the nose is easy to align precisely. If finish quality matters, practise on matching scrap before fastening the visible piece.

BUYING CHECK 05

Check the details before buying

Confirm the current specifications, price, availability, shipping and warranty with the retailer.

View at Edisons →

Affiliate link · Opens in a new tab

5. Look at magazine convenience and safe fault clearing

The listing specifies a quick-release stainless steel magazine holding up to 100 brad nails or staples. That capacity may reduce interruptions, although the information does not explain any loading differences between fastener types.

A reload window, touch-point safety mechanism and LED status light are also listed. The merchant says the status light indicates jams, low battery or an empty magazine. These are useful claimed features, but the supplied text does not establish the jam-clearing procedure or whether it needs tools.

Read the manual before use. Keep hands away from the firing line and the opposite side of thin material, wear suitable eye protection and follow the manual’s hearing-protection guidance. A contact safety mechanism does not make accidental discharge impossible.

Remove the battery before clearing a jam, inspecting the nose or carrying out maintenance, following the manufacturer’s procedure. Never bypass the safety contact. Before fastening into existing walls or fitted joinery, locate concealed electrical cables and plumbing rather than relying on surface appearance.

BUYING CHECK 06

6. Compare the complete kit cost with your likely use

The supplied description lists a 20V lithium battery, fast charger, carry case, spare No-Mar tip and a 200-piece starter set of brad nails and staples. Confirm the current package contents before paying, particularly the battery model and capacity.

The starter set’s split between brads and staples, and its fastener lengths, are not supplied. You may need job-specific consumables straight away. The spare tip is useful to have, but a protective tip cannot guarantee mark-free results on soft or finished surfaces.

Budget for suitable fasteners, any spare battery you need and replacement wear items. Check current pricing and availability, along with the seller’s warranty terms, returns process and access to replacement tips, chargers and service support. Those details are not established here.

This kit is most appealing if cordless convenience and both fastening functions solve real problems for you. It is less compelling if you need only one function, cannot confirm consumable compatibility or require proven performance for demanding daily work.

UNIMAC CLS500 15-50mm 18ga 2-in-1 Stapler/Brad Nail Gun, Cordless 20V Lithium Nailer

Frequently asked questions

Does the CLS500 need an air compressor?

No. The merchant describes it as battery-powered and operating without hoses or a compressor. You will still need access to power to recharge the battery.

Will it drive 50mm brads into hardwood?

The title states a 15–50mm range, but the supplied information does not verify performance with 50mm brads in a particular hardwood. Ask for application guidance and check the return conditions before buying for that specific task.

Can I use it for skirting boards?

It may suit some light trim installations, but suitability depends on the trim, backing material, fixing requirements and access. A brad nailer is not a masonry fixing tool; do not assume it can fasten skirting directly to brick or concrete.

Can I use staples I already own?

Only if their exact specification matches the tool’s requirements. The supplied information does not identify the staple series or crown width, so check the listing or manual before loading them.

Is the advertised 60-fastener rate a reason to buy?

Not on its own. For careful DIY work, accurate positioning, reliable driving and manageable handling are usually more useful than maximum firing speed. The claimed rate is not evidence of sustained site productivity.

Evidence and limitations

This guide uses the supplied merchant title and product description for the UNIMAC CLS500, SKU NALCLSUMCA5C0. We have not handled or tested the tool, verified its runtime or driving performance, or assessed long-term reliability.

Merchant specifications are not independent test results. Important missing details include operating weight, dimensions, battery capacity, charging time, full fastener compatibility, firing modes and depth adjustment. Check the current listing and manual, and seek written clarification where a missing detail affects your purchase.

Final pre-purchase checklist

  • Your job calls for brads or staples, not a structural fixing.
  • You have confirmed the exact compatible fasteners and suitable lengths.
  • The tool fits the work area with room for loading and safe handling.
  • Its battery capacity, charging arrangements and spare-battery options suit your workload.
  • You understand depth control, firing operation and jam clearing from the manual.
  • The current kit contents, total cost, support and return terms meet your needs.

Source: Edisons merchant listing. AI-assisted draft for editorial review. No independent hands-on testing is claimed.